Sometimes you can face a situation when there is a noise in the headphones in silence. It gets distracting, especially while working or playing at Hellspin Casino? Is it normal? Let’s understand when noise in headphones appears and what to do about it.
Is the Problem in the Headphones or the Source?
The cause of excessive background noise in the headphones or in the device to which they are connected. First, find out which of the gadgets you will deal with next.
Connect the headphones to another source. If there is noise when connected to a PC, connect to the phone and vice versa. If there is no other suitable device, choose to call a friend and agree to check with him. Accordingly, if the noise remains, the problem is in the headphones. But this isn’t certain, and you need another check.
Connect other headphones to the source. What if everything is bad, and the problem is in the headphones and PC at the same time? If the other headphones are buzzing too, the problem is in the source. If not, you should deal with the headphones.
Physical Damage
Carefully inspect the headphones, looking for cracks, separated seams, and so on. It’s worth shaking and listening to see if something inside is shaking. Through the crack may be dirt, contacts may oxidize, and the transmitter may be damaged.
It’s useful to remember if the headphones have not fallen recently or if the cat has not reached them. If the noise appeared after one of these events, it’s unlikely that its cause is something else.
You can repair it yourself or give it to professionals depending on your own skills and confidence.
Volume Control on Headphones
Wired and wireless headphones often have volume controls. It can happen so that in the headphones, volume is turned to maximum, but on the phone or PC, it isn’t.
And in general, the volume is comfortable, but the headphones for themselves “scream” at maximum; that is, amplify the incoming signal as much as possible. This mode of operation leads to “headphone burnout,” which is expressed in background noise.
Increase the volume on the source to maximum, and adjust it to a comfortable level on the headphones. Then the incoming signal will be strong enough to prevent the headphones from burning out and making noise. If the noise persists, then burnout has already occurred and it’s time to have the headphones repaired.
Contamination
Dust, sulfur, dirt from pockets, and more can build up on the drivers over time. Usually dirt causes the headphones to play quieter, but sometimes there is background noise. There’s a connection to the previous point. The headphones become quieter, the volume is turned up to maximum, and noise appears.
Clean the speakers, grids, sound conduits, depending on the form factor. Regularly cleaning headphones, especially in-canal and earbuds, is a basic rule of hygiene, and you shouldn’t neglect it, even if everything is fine with the gadget.
It’s better to use special tools for cleaning: brushes, metal hinges, and so on. Cleaning with needles, toothpicks and bogatyr blowing has caused more problems than it solved.
Wire and Plug
The main difference between wired headphones and wireless headphones is the wire.
Think back to whether a chair has run over the cable lately. If possible, question cats, dogs, and other pets that may have chewed or damaged the cable. But they are unlikely to admit it.
Inspect the wire and plug. Look for kinks, scuffs, holes in the braid, plugs held on a single “string,” and the like. Pay special attention to vulnerable places: connections to the plug and to the headphone housings.
If there is no obvious damage, listen to the headphones and alternately bend the cable in different places, starting from the same vulnerable. Where the character of the noise changes, it disappears or the sound goes away, there is damage.
To fix it, you repair or replace your headphones. If you feel the strength, will and willpower, you can try soldering the cable and/or replacing the plug. Or give it to a craftsman. If the cable is removable, you can just replace it with a new one.
Noise in headphones is sometimes associated with a plug that isn’t fully inserted. Seems silly, but sometimes happens to almost everyone. So, it doesn’t hurt to check if the plug isn’t dangling, insert it until it clicks and not to be “underdone.”
Headphones Features
Headphones with high sensitivity and low impedance can phonate when connected to a powerful amplifier. This is common with in-channel headphones, such as many audiophile multi-driver armatures.
Connect to a different source, amplifier, or add resistance. The simplest is to swap the amp and source for a variant that works better with sensitive headphones. Sometimes adding resistance can work. This is an adapter with a metal “can” that increases the resistance to the headphones, which can reduce background noise.